Regular Part Cleaning - Epson SureColor SC-S30600 User Manual

SC-S30600 Series User's Guide
c
Important:
❏ Ink cleaner should be used only to clean the
area around the wiper, caps, and print head.
Using ink cleaner on other parts of the printer
could damage the product.
❏ Used ink cleaner is classified as industrial
waste and should be disposed of in the same
way as used ink.
❏ Store ink cleaner at room temperature out of
direct sunlight.

Regular Part Cleaning

To preserve print quality and ensure good results, clean
the print head, wiper, and caps as suggested below.
❏ We recommend that part cleaning be performed at
least once a week.
❏ Cleaning should also be performed if colors in the
printout are faint or missing even after head
cleaning has been performed.
Clean the parts in the following order.
(1) Print head
(2) Wiper
(3) Caps
Moving the Print Head
This section describes how to position the print head for
part cleaning.
c
Important:
Be sure to follow the steps below when positioning
the print head. Moving the print head manually
could cause malfunction.
Maintenance
Buttons that are used in the following settings
A
Confirm that the printer is on and press #.
The Maintenance menu will be displayed.
B
Use the d/u buttons to select Head
Maintenance and press the Z button.
C
Press the Z button to move the print head to the
part cleaning position.
D
Open the maintenance covers at each end.
Cleaning Around the Print Head
Inspect the area around the print head and remove any
ink stains as described below.
55