Epson SureColor SC-S30600 User Manual page 14

SC-S30600 Series User's Guide
: Ink is low. You need to prepare a new
ink cartridge.
: The level of ink remaining has reached
the limit; replace with a new cartridge.
: The ink cartridge is not latched. Lower
the lock lever to engage the latch.
: No ink cartridge is inserted. Insert the
ink cartridge and lower the lock lever to
engage the latch.
: An error occurred. Check the message
on the screen, and clear the error.
: A cleaning cartridge is installed. The
height of the indicator shows the
amount of cleaning liquid remaining in
the cartridge in three levels.
Note:
You can also check the level of ink remaining using the
Ink Level option in the menus.
"The Ink Level Menu" on page 81
U
2 Ink color codes
BK : Black
Y : Yellow
M : Magenta
C : Cyan
E
Waste ink bottle status
Displays the approximate amount of space available
in the waste ink bottle. The display changes as shown
below when the waste ink bottle is nearly full or an
error occurs .
Normal
Introduction
Warning or error
1
14
1 Status indicators
The status of the waste ink bottle is shown as fol-
lows.
: No error. The indicator changes to
show the amount of space available.
: The waste ink bottle is almost full.
Ready a new waste ink bottle.
: The waste ink bottle is full. Replace
with a new waste ink bottle.
F
Additional print drying system status
This display shows settings for the optional addi-
tional print drying system.
No icon : Not installed, or it is not installed
correctly.
: The drying fan is enabled.
: The drying fan is not enabled. To start
the fan, select Additional Dryer for
On in the setup menu.
"The Media Setup Menu" on page 74
U