Keysight X Series Installation Notes page 12

Signal analyzer

Hide thumbs Also See for X Series:

Table of Contents

Upgrade Instructions

8. Referring to

Figure

panhead screws (3), and the twelve panhead screws (2) that attach the rear panel to the

instruments.

Figure 5

Rear Panel Removal

9. Remove the nuts and lock washers from the two SMA connectors (4), and the nut and lock

washer from the BNC connector (5).

5, remove the four flathead screws (1) at the corners, the eight large

Installation Note N9042-90012

Table of Contents

N9042b