Keysight X Series Installation Notes page 21

Signal analyzer

Hide thumbs Also See for X Series:

Table of Contents

A4 System Processor Installation

3. Referring to

Figure

rear of the instrument.

4. Install the two panhead screws (1) on each side to attach the A4 System Processor to the

instrument. Torque the screws to 9 in-lbs.

5. Install the two panhead screws (2) to attach the extractors to the A4 System Processor.

Torque the screws to 9 in-lbs.

Figure 14

A4 Processor Installation

Installation Note N9042-90012

14, use the two extractors to insert the A4 System Processor (3) into the

Upgrade Instructions

Table of Contents

N9042b