Instrument Button Up - Keysight X Series Installation Notes

Upgrade Instructions

Instrument Button Up

Dress Cover Installation
1. Referring to Figure
Figure 23 Dress Cover Installation
2. Attach the four rear feet (4) using the four panhead screws and washers (3). Torque the
screws to 21 in-lbs.
3. Install the four bottom feet (6) along with the locking keys.
4. Install the strap handles (2) to both sides of the instrument using the two screws (1) at either
end of the handles. Torque the screws to 21 in-lbs.
30
22, carefully slide the outer cover (5) onto the instrument.
Installation Note N9042-90012