Keysight X Series Installation Notes page 13

Signal analyzer

Hide thumbs Also See for X Series:

Table of Contents

10.Referring to

Figure

(1) from the rear panel ODI connector (2) by sliding the locking tab up.

Figure 6

Rear Panel ODI Cable Removal - Option ST1 or ST2

11.Carefully remove the rear panel from the instrument. If the instrument has Option ST1 or ST2

the rear panel will be reused. If not, it can be discarded.

Installation Note N9042-90012

6, if the instrument has Option ST1 or ST2, carefully remove the ODI cable

Upgrade Instructions

Table of Contents

N9042b