Remote Voltage/Amperage Control - Miller Trailblazer 325 Diesel Owner's Manual

6-9.

Remote Voltage/Amperage Control

2
Set Process
OM-279836 Page 36
�
Complete Parts List is available at www.MillerWelds.com
1
Set V/A Control
(Mid-Range: About 160 A)
1 Remote Receptacle RC4
Connect optional remote voltage/amperage
(V/A) control to RC4 (see Section 5-9).
2 Process/Contactor Switch
With remote control connected, weld output
in Stick or TIG is determined by a combina-
tion of front panel and remote control volt-
age/amperage settings. In Wire, weld output
is controlled through remote control only.
Connect remote V/A control to remote recep-
tacle RC4.
Set process (Stick shown).
Set V/A control.
Adjust remote V/A control (stick welding
only).
Min 30 A DC; Max 160 A DC
OR
Max (160 A DC)
Min (30 A DC)
Adjust Remote V/A Control
(Stick Welding Only)
259 872 / 248 009 A / S-0769 / S-0774