Connecting The Battery - Miller Trailblazer 325 Diesel Owner's Manual

5-4.

Connecting The Battery

3/8, 1/2 in.
Connect negative (–) cable last.
wrench
crescent wrench
Battery is most easily accessed through the
rear panel. Remove battery access panel
from rear panel. Connect battery, negative
cable last. Reinstall battery access panel.
� Do not allow the battery cables to touch
opposing terminals. When connecting
the battery cables attach the positive
nutdriver
chippinghammer
wirecutter
greasegun
filterwrench
file
259 703
�
Complete Parts List is available at www.MillerWelds.com
� Never start the engine when the cables
� Never disconnect the battery while the
frontcutter
paintbrush
(+) cable to the positive (+) battery ter-
minal first, followed by negative (-) ca-
ble to negative (-) battery terminal.
are loose or poorly connected to the
battery terminals.
engine is running.
259 707 / Ref. S-0756-D
� Never use a quick battery charger to
start the engine.
� Do not charge battery with Engine Con-
trol switch On.
� Always disconnect the negative (-) bat-
tery cable before charging battery.
OM-258413 Page 7
OM-279836 Page 23