5-6.
Weld Output Terminals
1
Stop engine.
Turn off power before connecting to
weld output terminals.
Do not use worn, damaged, under-
sized, or repaired cables.
1 Positive (+) Weld Output Terminal
OM-279836 Page 26
�
Complete Parts List is available at www.MillerWelds.com
2 Stick/TIG/Gouge Negative (-) Weld Out-
put Terminal
3 Wire Negative (-) Weld Output Terminal
For MIG welding, connect work cable to
Negative (-) terminal and wire feeder cable
to Positive (+) terminal.
3
2
For Stick welding, connect work cable to
Negative (-) terminal and electrode holder
cable to Positive (+) terminal.
For TIG welding, connect work cable to Pos-
itive (+) terminal and electrode holder cable
to Negative (-) terminal.
OM-279836 Page 9
277086-A