Voltage/Amperage Control With 14-Pin Remote Accessory - Miller Big Blue 400 Pro Owner's Manual

6-8. Voltage/Amperage Control With 14-Pin Remote Accessory

2 3
In Example:
Min = 20 A DC
Max = 205 A DC
Connect Remote
Control To Remote
Receptacle
Voltmeter Toggles Between
Preset And Actual Output
When Not Welding, Actual
Voltage While Welding
Connect Remote
Control To Remote
Receptacle
.
Complete Parts List is available at www.MillerWelds.com
Voltmeter Shows Open-Circuit
Voltage When Not Welding, Arc
Voltage While Welding
Set TIG or STICK Process
28
Set WIRE Process
1
56
205
Turn Remote Control On. Ad-
just Optional Remote
Control to 100%
0 Ammeter Shows Zero
Turn Remote Control On.
Adjust Optional Remote
Control to desired
weld output
1 Remote Receptacle
Connect optional remote control to
receptacle (see Section 5-12).
.
When a remote control is con-
nected to the Remote recep-
tacle, the Auto Remote Sense
feature automatically switches
voltage/amperage control to the
remote control. When a device
is connected to the Remote re-
ceptacle, remote voltage/am-
perage control is always avail-
able regardless of the position of
the Process/Contactor switch.
2 Voltmeter
3 Ammeter
Ammeter Shows Preset
Output When Not Welding,
Actual Amperage While
Welding
Set V/A Control
To Desired Maximum
Weld Output Using Weld
Meters
Min
(20 A DC)
Max (205 A DC)
Adjust Optional Remote
Control to desired
weld output
Weld meters show preset
output when not welding.
0774 / Ref.263 482-A / Ref. 263 482-B
OM-278215 Page 37