Advertisement
Step 10 Attach CE SW Rail to Swing End
NOTE: For the next steps an adult helper may be needed.
Using 1 Hex Bolt 5/16" x 1 1/2" (5/16" T-Nut, Washer, and Lock Washer) and 1 Hex Bolt 5/16" x 3"
(5/16" T-Nut, Washer, and Lock Washer), attach the CE SW Rail to the SW Post of the Swing End from Step 7.
Using 1 #8 x 2-1/2" Wood Screw, attach the CE SW Rail to the SW Post.
to use the correct holes in the Triangle Plate. Refer to the diagram below.
Make sure
: Remember to use the proper assembly procedure for the Hex Bolts.
NOTE
Do not over-tighten Hex Bolts.
Correct
Incorrect
5/16" x 1 1/2"
Hex Bolt
CE SW Rail
#8 x 2 1/2"
Wood Screw
110°
HARDWARE LIST
1 pc 5/16x3" Hex Bolt
1 pc 5/16x1-1/2" Hex Bolt
2 pcs 5/16" T-Nut
2 pcs 5/16" Flat Washer
2 pcs 5/16" Lock Washer
1 pc #8x2-1/2" Wood Screw
5/16" x 3"
Hex Bolt
Triangle
Plate
SW Post
REMEMBER TO USE THIS ASSEMBLY
PROCEDURE FOR HEX BOLTS
LOCK WASHER
HEX BOLT
T-NUT
FLAT WASHER
Advertisement
