Advertisement
Step 5 Attach CE Access Boards, Floor Gussets
Hold the CE Access Boards against the 2 Posts so that the lower CE
Access Boards are flush with the bottom of the Ground Sides, and the
upper CE Access Board is flush with top of the Floor Support.
Proceed to pre-drill with 1/8" drill bit, using the holes in the boards
as a guide.
Using 4 Wood Screws (#8 x 1 1/2") per CE Access Board, attach
3 CE Access Boards (1" x 6" x 19 3/4") to the Posts.
Using 2 Wood Screws (#8 x 1 1/2") per Floor Gusset (5/4 x 4 x 7-
7/8"), attach 4 Floor Gussets to the Floor Supports.
Using 2 Wood Screws (#8 x 3"), attach 2 Floor Gussets to the Posts.
Using 2 Wood Screws (#8 x 2 1/2"), attach 2 Floor Gussets to both
Uprights.
#8 x 1-1/2"
Wood Screw
#8 x 1-1/2"
Wood Screw
CE Access Board
1" x 6" x 19 3/4"
Floor Gusset
5/4" x 4" x 7-7/8"
#8 x 3"
Wood Screw
Floor Gusset
5/4" x 4" x 7-7/8"
Ground
Side
#8 x 2 1/2"
Wood Screw
#8 x 1 1/2"
Wood Screw
15
HARDWARE LIST
20 pcs #8x1-1/2" Wood Screw
2 pcs #8x2-1/2" Wood Screw
2 pcs #8x3" Wood Screw
WOOD PARTS LIST
3 pcs 1x6x19-3/4" CE Access Board
4 pcs 5/4x4x7-7/8" Floor Gusset
Use
Assembly
Help
NOTE: An adult helper
may be required for this step.
Square fort prior to attaching
the Floor Gussets.
Floor Support
#8 x 1-1/2"
Wood Screw
CE Access Board
1" x 6" x 19 3/4"
Post
#8 x 1-1/2"
Wood Screw
Square
Advertisement
