Advertisement
Attach Fort Walls and Tarp Upright
Step 4
Take previously assembled Floor Supports and attach to both Uprights of the
previously assembled Walls using 2 Hex Bolts 1/4" x 3 1/2" (1/4" T-Nut, Flat
Washer, and Lock Washer).
Using 4 Hex Bolts 1/4" x 2" (1/4" Flat Washer, Lock Washer)
attach the Floor Support (5/4" x 4" x 39 1/2") to the 4 Posts.
4 T-Nuts have been previously installed in Step 2.
Using 2 Wood Screws (#8 x 3") attach the Roof Ridge (2" x 2" x 23-3/8") to
the Tarp Uprights.
TIGHTEN BOLTS FROM ALL PREVIOUS STEPS
#8" x 3"
Wood Screw
Tarp Upright
1/4" x 3 1/2"
Hex Bolt
1/4" x 2" Hex Bolt
REMEMBER TO USE THIS ASSEMBLY
PROCEDURE FOR HEX BOLTS
T-NUT
LOCK WASHER
HEX BOLT
FLAT WASHER
Roof Ridge
2" x 2" x 22-3/8"
1/4" x 3 1/2"
Hex Bolt
14
HARDWARE LIST
2 pcs 1/4x3-1/2" Hex Bolt
4 pcs 1/4x2" Hex Bolt
2 pcs 1/4" T-Nut
6 pcs 1/4" Flat Washer
6 pcs 1/4" Lock Washer
2 pcs #8x3" Wood Screw
WOOD PARTS LIST
1 pc 2x2x23-3/8" Roof Ridge
Use
Help
1/4" x 2"
Hex Bolt
Notice: T- Nuts
have been previously
installed.
Floor Support
Post
Advertisement
