Advertisement
Step 7
Assemble Roof
Using 2 Pan Bolts #8 x 3/8" and 2 #8 Lock Washers, connect
2 L -Frame Brackets (1/2" x 12 1/4" x 22 3/4") together.
Make sure that the bolts go in from opposite directions, as
shown in the diagram below. Repeat for the other side.
Take one end of the Tarp and feed the L-Frame Bracket through the
Tarp pocket. Repeat for the other side.
With both L-Frame Brackets through the Tarp pockets, connect using
2 PanBolts #8 x 3/8" and 2 #8 Lock Washers for each side.
Make sure that the bolts go in from opposite directions, as shown in the
diagram below. Leave middle hole open.
Centre Tarp Roof on top of Tarp Upright, making sure it fits snug.
Using 2 Pan Screws #8 x 1", fasten Tarp Roof to the Tarp Upright using the
remaining centre holes.
Using 2 Pan Screws (#8 x 1/2") and 2 Washers (#8), Level Tarp and attach
Tarp to Roof Ridge through hems in Tarp.
#8 x 1"
Pan Screw
L-Frame Bracket
#8 x 3/8"
Pan Bolt with
#8 Lock Washer
#8 x 3/8"
Pan Bolt with
#8 Lock Washer
1
17
HARDWARE LIST
2 pcs #8x1/2" Pan Screw
2 pcs #8 Flat Washer
ACCESSORY LIST
4 pcs L-Frame Brackets
with hardware
1 Tarp (Roof)
Tarp
#8 x 1/2"
Pan Screw with
#8 Flat Washer
Roof Ridge
Advertisement
