Advertisement
Step 2
Assemble Floor Supports
Attach 4 T-Nuts 1/4" to the backs of the Floor Supports (5/4" x 4" x 39 1/2").
Using 2 Wood Screws (#8 x 3") per side attach the
SL Braces (2 x 3 x 15") to the Floor Supports (5/4" x 4" x 39 1/2").
Step 3
Attach Ground Side to Walls
Using 2 Hex Bolts 1/4 x 1 1/2" (1/4" T-Nut, Flat Washer, Lock Washer) and
2 Wood Screws (#8 x 1-1/2") attach the Ground Side (1 x 5 x 78-3/4") to both
Posts.
REPEAT THIS STEP FOR OTHER WALL
DO NOT OVER-TIGHTEN HEX BOLTS.
#8 x 1-1/2"
Wood Screw
Ground Side
(1 x 5 x78-3/4")
1/4"
T-Nut
#8 x 3"
Wood Screw
1/4 x 1-1/2"
Hex Bolt
1/4 x 1-1/2"
Hex Bolt
#8 x 1-1/2"
Wood Screw
Floor Support
(5/4 x 4 x 39½")
SL Brace
(2 x 3 x 15")
REMEMBER TO USE THIS ASSEMBLY
13
HARDWARE LIST
4 pcs 1/4" T-Nut
4 pcs #8x3" Wood Screw
WOOD PARTS LIST
1 pc 2x3x15" SL Brace
2 pcs 5/4x4x39-1/2" Floor Support
#8 x 3"
Wood Screw
HARDWARE LIST
4 pcs 1/4x1-1/2" Hex Bolt
4 pcs 1/4" Lock Washer
4 pcs 1/4" Flat Washer
4 pcs 1/4" T-Nut
4 pcs #8x1-1/2" Wood Screw
WOOD PARTS LIST
2 pcs 1x5x78-3/4" Ground Side
PROCEDURE FOR HEX BOLTS
LOCK WASHER
HEX BOLT
T-NUT
FLAT WASHER
Advertisement
