Advertisement
Step 13 Attach Swings, Rocks, Hole Plugs
Using 4 Pan Bolts 1/4" x 1 1/4", (3/16" Flat Washer, 1/4" Lock Washer, and 1/4" Barrel Nut), attach 4 Rocks to the 4
Rock Boards. Make sure to use the correct holes in rocks.
Note: The holes should be vertically aligned with the Pan Bolt on top and the Pan Screw on the bottom.
Using 4 Pan Screws (#8 x 1"), screw into remaining hole on the Rocks.
Attach 2 Swings to the 4 Swing Hangers.
Note: Place a Hole Plug where there is a visible hole and on both sides, to completely cover hole.
ATTENTION
* Periodically check and re-tighten all hex bolts, lag screws, and wood screwsto ensure safety.
Do not over tighten to avoid crushing wood.
*Thoroughly read instructions and the owners manual before using play centre.
*Keep assembly instructions for future reference.
1/4 x 1-1/4" Pan Bolt
3/16" Flat Washer
1/4 Lock Washer
Hole Plugs
ACCESSORY LIST
4 pcs Rocks with hardware
2 pcs Swings
4 pcs Hole Plugs
Rock Board
1/4" Barrel Nut
#8 x 1"
Pan Screw
Advertisement
