Advertisement
Step 1 Assemble Two Walls
Using 1 Hex Bolt 5/16" x 4" (5/16" T-Nut, Washer and Lockwasher),
attach
loosely leaving a gap between the Tarp Upright (2" x 3" x 47 3/4")
and 2 Posts (5/4" x 4" x 79").
Remember to use the proper assembly procedure for the Hex Bolt.
Note: Do not tighten the Hex Bolt
Repeat Step 1 for other side.
Tarp Upright
5/16" x 4" Hex Bolt
2" x 3" x 47 3/4"
5/4" x 4" x 79"
Post
12
HARDWARE LIST
2 pcs 5/16x4" Hex Bolt
2 pcs 5/16" T-Nut
2 pcs 5/16" Flat Washer
2 pcs 5/16" Lock Washer
WOOD PARTS LIST
2 pcs 2x3x47-3/4" Tarp Upright
4 pcs 5/4 x4x 79" Post
REMEMBER TO USE THIS ASSEMBLY
PROCEDURE FOR HEX BOLTS
LOCK WASHER
T-NUT
FLAT WASHER
HEX BOLT
Advertisement
