Machine Input/Output - Toshiba TOSNUC 92 Connection Manual

4.8

Machine Input/Output

Distributed I/O modules for TC200 series can be connected to this CNC system. The
input signals and output signals are controlled by built-in PLC on the CNC.
See TC200 instruction manuals for the distributed I/O modules.
I/O modules mainly used are shown in Table 4.8.1.
Type
(Number of I/O points)
TR64DIRYS-1
(32 / 32)
TR96DIRY
(48 / 48)
Table 4.8.1
Input type Output type
+24VDC Relay
(+24VDC/100VAC)
+24VDC Relay
(+24VDC/100VAC)
– 89 –
Control power
+24VDC
+24VDC
STE 73843