Toshiba TOSNUC 92 Connection Manual page 5

!
DANGER
!
DANGER
!
WARNING
!
WARNING
!
WARNING
!
CAUTION
NEVER turn the power on during installation of
equipment and wiring. Otherwise, you will be struck by
electric shock and the equipment will be damaged.
Be sure to connect the grounding line.
If grounding is incomplete, you will be struck by electric
shock and error operation such as uncontrollable axis
will result in.
Be sure to perform electric work pursuant to the
Electrical Installations Technical Requirements, Interior
Wiring Requirements and this manual.
If the power circuit is faulty, power capacity is short or
the work is incomplete, you will be struck by electric
shock and a fire will result in.
Be sure to use the power supply of 200 VAC - 230
VAC, 50/60 Hz. If other line voltage is connected, you
will be struck by electric shock, a fire will be caused by
heat generation to destroy the devices.
NEVER disassemble and repair the equipment by other
than the qualified maintenance engineer. Otherwise, a
fire, electric shock and mis-operation will result in.
Dispose of waste materials as industrial wastes.
Dispose of batteries in a manner as prescribed by each
autonomy.
– 5 –
STE 73843