2.3
Selective Specifications
This CNC system provides variations for the main control unit, operation & display
unit, machine I/O, and servo system.
Selective specifications and cautions are described in this section.
2.3.1
Main Control Unit
Two (2) types of the main control units as shown in Table 2.3.1 are available.
These units are designed for systems of up to four (4)-axis control.
The set position of each module should be as shown in Fig.2.3.1.
SERVO-Module
T9SV1
T9NC1
T9RK2S
Table 2.3.1
Type
T9RK2S
T9RK3S
MAIN-Module
POWER-Module
T9PW1
CNDC
CNOP
CNIP
CNP1
CNAC
Fig. 2.3.1
Number of slots
(except Power-Module slot)
2 (No option slot)
3 (One(1) option slot)
Option-Module
SERVO-Module
T9SV1
– 18 –
MAIN-Module
POWER-Module
T9NC1
T9PW2
CNDC
CNOP
CNIP
CNP1
CNAC
T9RK3S
STE 73843