Toshiba TOSNUC 92 Connection Manual page 54

Input/Output Signal name
Input PON
POF
EMGA
EMGB
EMGRST
Output PONL
POFL
EMGL
!
CAUTION
Notes:
1) If there is noise trouble, use a shielded cable and ground the shield.
2) See section 7 for connection the emergency stop push-button(s).
< Input/Output specification >
Item
Input current at contact ON
Switch side contact capacity
Switch side conditions
Power supply
Input current at contact ON
Switch side contact capacity
Power supply
Maximum output current
Connected display conditions
Power supply
This power supply (24 VDC, T9PW2–CNON–Pin 1) cannot
be used for other purposes.
Also, DO NOT connect other power supplies.
– 54 –
Specification
1 mA
0 VDC, 16 mA or over
Dry contact
Internal supply (Pin 1)
7.5 mA
30 VDC, 16 mA or over
Internal supply (Pin 1)
25 mA
Exclusive for LED
Internal supply (Pin 1)
STE 73843