User Media Drive Unit; Machine Input/Output Module (Plc) - Toshiba TOSNUC 92 Connection Manual

2.3.3

User Media Drive Unit

The customers can use User Media drive unit in order to load/dump programs and
some other data.
2.3.4

Machine Input/Output Module (PLC)

This CNC system uses a built-in PLC system. The Main module includes PLC
controller. The Main module is connected to distributed I/O modules by the serial
communication cables. TC200 series distributed I/O modules can be used.
The I/O modules mainly used are shown in Table 2.3.4.
Type
(Number of I/O points)
TR64DIRYS-1
(32 / 32)
TR96DIRY
(48 / 48)
Note: See respective instruction manuals for details. PLC functions, TC200 series I/O
modules instruction manuals are provided separately.
Table 2.3.3
Type
FDU2B
FDU2C
Table 2.3.4
Input type
24VDC
24VDC
Media
Compact Flash card
Floppy disk
Compact Flash card
Output type
Relay
(24VDC/100VAC)
Relay
(24VDC/100VAC)
– 20 –
Control power
24VDC
24VDC
STE 73843