Table of Contents
Advertisement
Data format
S T
Header
There are three kinds of headers for the weighing value as follows.
ST： Weighing data is stable.
US： Weighing data is not satable.
OL： Data is over.(beyond the measurement range)
Data is always digits including sigh, decimal point.
There are three types of units as follows:
_ k g：
_ _ g：
_ P C：
C
L
is always output for the terminator.
R
F
Example of output data
Weighing data"kg"(＋) S T , + 0 0 1 2 . 3 4 5 _ k g
Weighing data "g"(－) S T ,
Overweight
10.3. Data output mode (prt)
Stream mode (prt-0)
Data is output continuously. Data output is abput 10 times per second.
Command mode (prt-0～6)
The scale is controlled by a command sent from a personal computer etc,
connected externally. For details, refer to "10-4. Command mode".
In ptr-1, data is output only by command.
Output by PRINT key (prt-2)
When the weighing value is stable (stable mark is lit), pressing the .PRINT key will
output the data. The display will disappear for a moment to inform you that data has
been output.
Auto print + data output (prt-3)
When the value is stabilized (stability mark is lit) and its value is + 5d (d=scale) or
greater, data will be output. The next output will be after the weghing value returns
to +4d or less.
Auto print +/- data (prt-4)
,
+ 0 0 0 0 0
Data
Unit amount of weighing data"kg"
Unit amount of weighing data "g"
Unit amount of number
"kg"(＋) O L , + 9 9 9 9 . 9 9 9 _ k g
.
0 0 _ k g
Unit
"PCS
- 0 0 0 0 1 2 3 4 _ _ g
19
C
L
R
F
Terminator
"
C
L
R
F
C
L
R
F
C
L
R
F
Advertisement
Table of Contents
