Setting A Connected Computer's Resolution And Refresh Rate - SMART GX Series Installation And Maintenance Manual

Chapter 3 Connecting computers and other devices
2. Select the source using one of the following methods:
Using the Input settings menu
a. Open the Toolbar by tapping one of the
side Toolbar buttons
the screen).
b. Tap the Input icon
Note
A green circle
HDMI3, Type-C1, Type-C2, DP, or VGA). Inputs with a connected source have a green dot beside
the input name, rather than a gray dot. The input name also appears in green text rather than
gray when an input is connected.
3. Tap the computer's input or use the navigation keys on the remote control to select the source and
then press the OK button.
The device's output appears on the display's screen.
Tip
You can rename inputs, enable or disable inputs , configure the display to turn on when an active
video signal is connected, and automatically switch the input when an active video signal is
connected.
For more information, see Input and output on page 75.

Setting a connected computer's resolution and refresh rate

This table presents the recommend resolutions and refresh rates for the display's inputs:
Input
USB Type-C, Display Port
Alternate Mode
HDMI 1 1
HDMI 2
HDMI 3
VGA
Display Port
1
Located on the display's front connector panel.
smarttech.com/kb/171861
(on either sides of
.
appears around the currently selected input (PC, Android, HDMI1, HDMI2,
Maximum resolution
3840 × 2160
3840 × 2160
3840 × 2160
3840 × 2160
1920 × 1080
3840 × 2160
Using the remote control
Press the Input icon .
Refresh rate
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
40