SMART GX Series Installation And Maintenance Manual page 80

Appendix 7 Adjusting display settings
Option
Clear password
Set password
Change password
Settings lock password
Clear password
Set password
Change password
Startup and shutdown
Startup input
Startup input
Enter Ready mode after
startup
Wake On LAN
smarttech.com/kb/171861
Values Function
[N/A] Clears the lock screen password.
[N/A] Set a lock screen password.
[N/A] Change the four-digit lock screen
password.
Access options for configuring the
settings lock password.
[N/A] Clears the settings lock password.
[N/A] Set a password to access certain
settings.
[N/A] Change the four-digit settings lock
password.
[N/A] Options for configuring startup and
shutdown settings.
Last shutdown Select which input source is
input selected on startup. Disabled inputs
will not appear in the list.
PC
Android
HDMI1
HDMI2
HDMI3
Type-C1
Type-C2
DP
VGA
On Enables or disables whether the
display enters Ready mode after
Off
starting.
On Enables or disables waking the
display when it receives a Magic
Off
Packet via the network.
Note
The display's power
consumption may increase
when Wake On LAN is enabled.
Notes
[N/A]
This option is available when an
existing password has been
cleared.
The passcode is set when turning
on the display for the first time.
Important
The display's Screen lock feature
is enabled only when a
passcode is set.
[N/A]
[N/A]
The Settings Lock Password is not
the same as the user's Lock Screen
Password.
[N/A]
[N/A]
By default, the input source active
at the last shutdown is the selected
startup input.
The PC option is available when an
OPS PC module is installed in the
display's accessory slot.
When enabled, the display enters
Ready mode after starting and no
image is displayed on the screen.
Pressing the power or home
buttons will wake the display.
[N/A]
80