SMART GX Series Installation And Maintenance Manual page 29

Chapter 2 Installing the display
To connect to an Ethernet network
1. Connect an Ethernet cable to either of the RJ45 jacks on the display.
2. On the Home screen, tap the Ethernet icon
OR
On the Home screen, tap the Apps
3. Toggle the Ethernet switch to on.
4. To obtain an IP address automatically, turn the Obtain IP address automatically (DHCP) switch on.
OR
Tap IP Address and fill out the static network configuration options as necessary.
To add a VPN connection
1. On the Home screen, tap the Apps icon
2. Tap Add VPN.
3. Complete the following steps:
Type the name of the VPN in the Name text box.
o
Select a type of VPN from the Type drop-down menu.
o
o Type the server address in the Server address text box.
o You can select the PPP encryption(MPPE) checkbox to enable Microsoft Point-to-Point
Encryption (MPPE).
Type a user name and password.
o
4. Click Save.
smarttech.com/kb/171861
in the top-right corner.
icon and then tap the Settings
and then tap the Settings icon
icon > Network > Ethernet.
> Network > VPN.
29