SMART GX Series Installation And Maintenance Manual page 87

Appendix 8 Adjusting Input settings
Option
Treble
Balance
Audio modes
Standard
Meeting
Class
Custom
Mute
Screen
Pixel shift
Eye Care
AutoLight
SaveEnergy
Image scaling
Note
The following settings are only available when DP or VGA inputs are selected.
4:3
16:9
smarttech.com/kb/171861
Values Function
-5 to 5 Sets the treble level.
-50 to 50 Sets the L/R balance of the display's
built-in speakers.
On This is the default audio mode
Off
On An audio mode optimized for
meeting rooms, with slightly reduced
Off
bass.
On An audio mode optimized for
classrooms, with slightly reduced
Off
bass and slightly increased treble.
On An audio mode that allows full user
control of bass and treble
Off
adjustments.
On Mutes the display's audio system.
Off
On If enabled, the display's image will
move up and down momentarily to
Off
reduce the risk of image burn-in. To
set timing options, see Pixel Shift in
the System on page 79 section of
display settings).
On Reduces the amount of brightness
and blue light to help reduce
Off
eyestrain.
On Detects the ambient light in the room
and automatically adjusts the screen
Off
brightness.
On Reduces the screen brightness of the
display to save power.
Off
On Sets the screen image's aspect ratio
to 4:3
Off
On Sets the screen image's aspect ratio
to 16:9
Off
Notes
This setting is only adjustable when
Custom audio mode is enabled (see
Audio modes below).
[N/A]
[N/A]
[N/A]
[N/A]
[N/A]
[N/A]
[N/A]
[N/A]
[N/A]
[N/A]
[N/A]
[N/A]
87