SMART GX Series Installation And Maintenance Manual page 88

Appendix 8 Adjusting Input settings
Option
PTP
Auto
Display
Note
The following settings are applicable to all inputs.
Brightness
Contrast
Hue
Sharpness
Display modes
Standard
Bright
Soft
Custom
Color modes
Standard
Cold
Warm
••• icon (additional
settings)
smarttech.com/kb/171861
Values Function
On This setting may help if the 16:9
setting causes the screen image's
Off
edges to be clipped.
On Enables the display to automatically
choose the optimal image scaling
Off
for the source video signal.
This is the default setting.
1 to 100 Sets the overall brightness of the
image.
1 to 100 Sets the difference in brightness
between the lightest and darkest
parts of the image.
1 to 100 Sets the hue (color) of the image.
1 to 100 Sets the sharpness of the image.
On The default display mode, for
optimal performance.
Off
On A brighter image mode that may use
more power.
Off
On A softer image mode with slightly
reduced contrast.
Off
On An image mode that allows users to
customize the image brightness,
Off
contrast, hue, and sharpness.
On The default color mode.
Off
On Raises the screen image's color
temperature.
Off
On Lowers the screen image's color
temperature.
Off
[N/A] Manually adjust the red, green, and
blue color channels individually. You
can also reset the white balance to
its default setting.
Notes
[N/A]
This is the recommended setting for
image scaling.
[N/A]
[N/A]
This setting is available only when
Custom display mode is enabled
and is not available for all inputs.
This setting is available only when
Custom display mode is enabled
and is not available for all inputs.
[N/A]
Different shades of light gray may be
harder to see in this mode.
[N/A]
[N/A]
[N/A]
[N/A]
[N/A]
[N/A]
88