SMART GX Series Installation And Maintenance Manual page 82

Appendix 7 Adjusting display settings
Option
Check for update
Factory reset
Factory reset
Security
Credential storage
Trusted credentials
System
User
User credentials
Install from storage
Clear credentials
Install from unknown
sources
smarttech.com/kb/171861
Values Function
[N/A] Manually check for updates to the
display's firmware.
Cancel Resets all options to their default
values.
Confirm
[N/A] You can view installed trusted
system and user credentials
(certificates), control the enabling
status of these credentials, and
view the details of each certificate.
[N/A] View and enable or disable trusted
credentials.
[N/A] Enable or disable trusted system
credentials.
[N/A] Enable or disable trusted user
credentials.
[N/A] View and modify user credentials.
[N/A] Install a certificate from local
storage or a USB drive.
[N/A] Removes security certificates from
the display.
Notes
If an update is available, a
message appears on screen and
asks whether the user wishes to
install it.
Note
The display must be connected
to the internet to check for
system software updates. Check
the display's network settings.
To check the network settings for
SMART Board GX (V2) series
interactive displays, see Network
on page 73.
Only administrators should reset
the display to factory settings
[N/A]
[N/A]
[N/A]
[N/A]
[N/A]
[N/A]
Caution
Removing security certificates
may affect the performance of
some applications.
82