Modifying The Server Configuration Parameters; Nortel Mobile Communication 3100 Series Portfolio; Nn42030-600 01.04 Standard - Nortel MCG3100 Administration Manual

34 Server administration
Procedure 6
Modifying the server configuration parameters
Step
1
2
3
4
5
6
7
Table 3 "MCG 3100 Server configuration parameter fields" (page
34)
Table 3
MCG 3100 configuration parameter fields
Field
Gateway Address
Backup Gateway SIP Listening
Address
Copyright © 2007, Nortel Networks
.
Action
Log on to the MCG 3100 Web Console using the Administrator
username and password.
Click Gateways.
Click Configuration for the Gateway.
Click Unlock.
The configuration parameters are now unlocked and you can modify
them.
Modify the configuration parameters as required.
The server IP addresses that appear in the configuration window are
automatically populated during the MCG 3100 software installation.
Normally you need not change these addresses.
Click Save to save the modified parameters.
You receive a prompt to restart the gateway.
Click OK.
In a redundant configuration, changes automatically update on the
secondary server.
describes the configuration parameters for the MCG 3100 Server.
Description
The IP address that the local MCG 3100 uses for HTTP traffic.
The IP address and port of the second MCG 3100 in a redundant
pair.
Syntax: [IP]:[port]
Example: 192.167.130.76:5061

Nortel Mobile Communication 3100 Series Portfolio

Nortel Mobile Communication Gateway 3100 — Administration

NN42030-600 01.04 Standard

Release 2.0 14 November 2007
ATTENTION
—End—