Pca Configuration; Nortel Mobile Communication 3100 Series Portfolio; Nn42030-600 01.04 Standard - Nortel MCG3100 Administration Manual

PCA configuration
Each MCC 3100 for BlackBerry and Nokia instance is represented by a
Call Server PCA.
The Primary DN of the PCA determines the user's published addresses:
both private electronic serial number (ESN) and public direct inward dialing
DID (for example, Primary DN: 5335 contributes to the ESN address
3435335 and DID address +16139675335).
The mobility HLOC is a prefix to all mobile user identities on the PCA target
DN. The main purpose of the Mobility HLOC is to provide a digit sequence
that is unique within the SIP domain to identify a MCC 3100 for Windows
Mobile client that does not conflict with the existing dial plan and routing
configuration for their CDP and UDP numbers.
The Target DN of the PCA extends the user's incoming calls to mobile
clients that are accessible through SIP domain. A typical setup would
be AC1 + Mobility Home Location (HLOC) + the user's ESN number (for
example, Target DN: 65553435335).
It can be necessary to increase the Forward No Answer (FNA) timeout for
MCC 3100 for Blackberry/Nokia users. The PCA extends all calls to the
MCG 3100. The MCG 3100 then presents the incoming call to the MCC 3100
clients over the cellular data channel of the MCC 3100 (using HTTP/HTTPS).
It can take a few seconds for the data transmission to reach the client depending
on the current state of the mobile phone. If the FNA timeout is too short users do
not have reasonable time to (potentially log on) and answer the call before the call
server invokes FNA and sends the call to the FNA destination.
Caller ID table
All CS 1000 telephones use the Caller ID table. The Caller ID table is
required for the MCC 3100 to correctly build the Caller ID (CLID) for both
Private network and Public network calls from a number or extension.
Copyright © 2007, Nortel Networks
.
Mobile Communication Client 3100 for BlackBerry and Nokia 81
The URI incoming for the SIP INVITE for the call is:
sip:+31123456789@domain.com;user=phone
The digits sent on the outgoing trunk are: 0123456789
Example 2 within North America
AC1=8, CNTC=1, NATC=1, INTC=011
The URI incoming for the SIP INVITE for the call is:
sip: +12125551212@domain.com;user=phone
The digits sent on the outgoing trunk are: 812125551212

Nortel Mobile Communication 3100 Series Portfolio

Nortel Mobile Communication Gateway 3100 — Administration

NN42030-600 01.04 Standard

Release 2.0 14 November 2007
ATTENTION