Group Call Server Configuration; Nortel Mobile Communication 3100 Series Portfolio; Nn42030-600 01.04 Standard - Nortel MCG3100 Administration Manual

Mobile communication gateway mobile communication 3100 series
Hide thumbs Also See for MCG3100:
Table of Contents

Advertisement

36 Server administration
Field
Gateway name
User Prefix for Call Termination The mobility HLOC that is added to the PCA target DN on the
User Prefix/Phone-context for
Call Origination
Dial In Service DN
Enterprise numbers are directly
dialable
Domain
Group Call Server configuration
You can configure parameters that enable the Group Call Server to interact
with the MCG 3100 address.
page" (page 37)
Server tab selected. For more information, see
Group Call Server parameters" (page
Copyright © 2007, Nortel Networks
.
Description
The gateway ID for the MCG 3100 that is defined on the
communication server.
For CS 1000 Release 5.0 this is the gateway endpoint name for
the MCG 3100 configured on the SPS
CS 1000 to ensure a uniquely routable number from the PCA to the
MCG 3100. The MCG 3100 uses this parameter to strip leading
digits from the request-URI to produce the username of the
MCC 3100 for which the call is destined.
Source-based routing (SBR) is a feature on the CS 1000 R5.0
SPS that associates lineside features such as CLID to calls
originated from SIP clients. If the content of this field is a digit,
the system prepends the number to the username of the user in
the P-Asserted-Id field for all calls originated from the MCG 3100.
If the content of this field is not composed of digits, the system
adds the content of this field to a phone context parameter in the
P-Asserted-Id:
sip:<number>phone-context=<User Prefix/Phone-Context for call
origination parameter>@<domain>
For more information about source-based routing, see Nortel
Mobile Communication 3100 Series — Planning and Engineering
(NN42030-200).
This is the number in the request URI for service DN calls that
are proxied by the CS 1000 R5.0 SPS to the MCG 3100. The
service DN allows MCG 3100 users to place calls directly from their
wireless devices to other parties using Direct Outbound call mode.
This parameter is permanently enabled on the MCG 3100
The realm for SIP registration defined on the Enterprise
Communication Server.
shows the MCG 3100 Web Console with the Group-Call

Nortel Mobile Communication 3100 Series Portfolio

Nortel Mobile Communication Gateway 3100 — Administration

NN42030-600 01.04 Standard

Release 2.0 14 November 2007
Figure 3 "Group-Call Server Configuration
Procedure 7 "Configuring
37).

Advertisement

Table of Contents
loading

Table of Contents