Nortel CC MIS Release Note page 74

Fixes
Table 3:
Software fixes in Release 6.0.1 (Part 2 of 7)
CR number
Q01304883
Q01307305
74
CR title and explanation
CC MIS SNMP agent generating "Malformed SNMP
packet from standard agent" errors
The CC MIS SNMP agent cannot handle ASN.1 encoded
integers longer than 4 bytes in length, which sometimes
results in the following CC MIS error logs being captured
on application startup:
Warning at 06/02/04 09:23:18 CST
ASN.1 integers longer than 4 bytes not supported
Process: snmpxa (2392) Partition: 0
Source: asn1.c, asn_parse_int, 339
Warning at 06/02/04 09:23:18 CST
Malformed SNMP packet from standard agent
Process: snmpxa (2392) Partition: 0
Source: xa_snmpif.c, snmpd_discovery_resp, 2170
Support for 64-bit integers was added to the CC MIS
ASN.1 library.
Unable to configure chained wallboards on a single
port
The Terminal Server configuration screen does not allow
wallboard displays to be chained on a single port on the
terminal server. The screen handler is not adding the
correct configuration in the database.
A composite key used to enter the wallboard definition
entries into a sorted list was dependent on a big-endian
processor architecture for proper operation. The Linux
version of CC MIS is now based on the Intel architecture,
which is little-endian, thus breaking the sorting algorithm.
A byte-order independent method of sorting the wallboard
configuration entries is used in place of the previous
algorithm.
Call Center Management Information System
Standard 2.0