Nortel CC MIS Release Note page 67

May 2007
For more information about the types of CC MIS client software
installations, see CC MIS Installation and Maintenance (297-2671-545).
Installing from the CD-ROM
To install the CC MIS Release 6.0.1 client software on a Windows PC,
insert the CC MIS Software CD-ROM in the CD-ROM drive. The
installation program starts automatically. If the installation program does not
start automatically, manually start the installation using one of the following
two methods:
1. Use Windows Explorer to navigate to the Win folder on the CD- ROM,
and then double-click the setup.exe program found in that folder.
2. From the Windows Start menu, select Run. In the Open box, type
D:\win\setup.exe (where D is the letter of your CD-ROM drive), and
then click OK.
When the installation program starts, follow the prompts to install the
CC MIS client software.
For detailed information about the software installation, see CC MIS
Installation and Maintenance (297-2671-545). CC MIS Installation and
Maintenance also provides additional information regarding the per-
machine and per-user types of installations.
Upgrading from CC MIS 3.2 and later
The installation media is not required for PCs already running Release 3.2
or later of the Windows-based CC MIS client software. After CC MIS
Release 6.0.1 is installed and configured on the CC MIS server, users can
start the current version of the CC MIS client on their PCs and are prompted
to download and automatically install the upgrade when a connection to the
CC MIS 6.0.1 server is established.
Release Notes
Installation overview
67