Nortel CC MIS Release Note page 38

Software release history
You can access additional IBNRTE tables (IBNRT2, IBNRT3, and
IBNRT4) using the Config > View > IBNRTE Tables submenu (see
Figure 8).
Figure 8:
You can now change route entries to the new tables from the Groups >
Time Overflow, Groups > Overflow Targets and the Groups > Special
Routing windows in Configuration Control.
You can now include entries for the new IBNRTE and OFRT tables in the
System Report > Configuration Report.
Addition of the Dynamic Host Configuration Protocol (DHCP) function,
with which CC MIS can connect to a LAN without the requirement of
entering an IP address. This feature makes use of the Session > Setup >
Communications command. With this command, you can define several
connection profiles and start a new CC MIS session with the profile of
your choice. (Multiple sessions connected to different partitions are
permitted). When defining a profile, select the connection type, specify
the Host IP address, and enter the partition name and password (see
Figure 9).
38
Config > View > IBNRTT Tables submenu
Call Center Management Information System
Standard 2.0