Nortel Callpilot; Nn44200-312 01.02 Standard - Nortel CallPilot Server User Manual

Nortel callpilot: user guide
Hide thumbs Also See for CallPilot Server:
Table of Contents

Advertisement

92 Chapter 5 Configuring the CallPilot server software
To run the Configuration Wizard
Step
For each page in the Configuration Wizard, follow the instructions on the page.
Use the information you recorded in the "Configuration Wizard worksheet" in the
CallPilot Installation and Configuration Task List.
If you have upgraded your CS 1000S to a CS1000E, the Terminal Numbers (TNs)
on the CS 1000 were remapped to the large system format. For CallPilot to
operate, you must change the switch type to M1 and the TNs to the large system
format in the Configuration Wizard Switch Information page.
If you need additional instructions, click Help. If you are rerunning the
Configuration Wizard, some pages may be prefilled. Some pages also contain
default values. If the prefilled information does not match the information planned
for this server, then update any prefilled values as required.
1
2
3
4
Copyright © 2007, Nortel Networks
.
Action
Log on to CallPilot Manager. See
with CallPilot Manager" (page
Click the Configuration Wizard shortcut on the main CallPilot
Manager page, or select Tools -> Configuration Wizard.
Result: The Welcome page of the Configuration Wizard appears.
Click Next to go to the next page.
Read the instructions carefully on each page. Click Help on the
Configuration Wizard page if you need additional instructions. When
you are finished with a page, click Next to continue.
Note: If you would like to change the CallPilot administrator
account password while the CallPilot server is in a domain,
follow the below steps:
a. Log on with one of the CallPilot local accounts.
b. Right-click on My Computer and select Properties.
c. Select Computer Name.
d. Click Change and select Workgroup.
e. Type WORKGROUP as the workgroup name.
f.
Restart and log on with one of the CallPilot local accounts.
g. Run the Configuration Wizard to change the CallPilot
administrator password or the CallPilot server host name.

Nortel CallPilot

Communication Server 1000 and CallPilot Server Configuration

NN44200-312 01.02 Standard

5.0 3 May 2007
ATTENTION
"Logging on to the CallPilot server
86).

Advertisement

Table of Contents
loading

This manual is also suitable for:

1000 con?guration guide

Table of Contents