Nortel Callpilot; Nn44200-312 01.02 Standard - Nortel CallPilot Server User Manual

110 Chapter 6 Testing the CallPilot installation
Alternative methods for verifying that CallPilot is ready to accept calls
View events in CallPilot Manager or in the operating system
Event Viewer on the server
The Pass, Warning, and Error system-ready indicator messages appear as
events in the Event Browser and Alarm Monitor in CallPilot Manager, and in
the operating system Event Viewer on the server.
By default
•
•
For detailed instructions on viewing events, see the CallPilot Manager
online Help.
Observe the HEX display (for the 201i server only)
The HEX display on the 201i server faceplate displays the following
messages.
IPE CallPilot server
HEX display
DOWN
OK
BOOT
PASS
WARN
FAIL
Copyright © 2007, Nortel Networks
.
the Event Browser and Alarm Monitor show only the latest 100 events
Change the default settings to remove the system-ready indicator events
from the Event Browser and Alarm Monitor windows.
the Event Browser lists only Critical events
You can change the Filter Criteria so that Major, Minor, and Information
events are listed as well.
Note: The DOWN, OK, MIN, MAJ, CRI, and "???" messages can
appear regardless of whether the Configuration Wizard has been run.
Some MIN, MAJ, and CRI events may appear because the server has
not been configured. These events may be resolved after running the
Configuration Wizard. The BOOT, PASS, WARN, and FAIL messages
are system-ready indicator messages; they do not appear if the
Configuration Wizard has not been run.

Nortel CallPilot

Communication Server 1000 and CallPilot Server Configuration

NN44200-312 01.02 Standard

5.0 3 May 2007
Description
The operating system is starting.
The operating system start sequence has passed.
CallPilot is starting and is not yet fully operational.
Please wait.
CallPilot is fully operational and ready to accept calls.
CallPilot is ready to accept calls; however, some
services failed the start sequence. Check the event
log for further information.
CallPilot failed the start sequence and cannot accept
calls. Check the event log for further information.