Table 25 Vrrp Tab Fields - Nortel Passport 8600 Configuring

Table 25 VRRP tab fields

Field
Vrld
IpAddr
VirtualMacAddr
State
Control
Priority
MasterIpAddr
FastAdvertisementEnable
AdvertisementInterval
Chapter 4 Configuring and graphing ports
Description
A number that uniquely identifies a virtual router on
a given VRRP router. The virtual router acts as the
default router for one or more assigned addresses
(1 to 255).
IP address of the virtual router interface.
The virtual MAC address of the virtual router. The first
three octets consist of the IANA's OUI, the next two
octets indicate the address block of the VRRP protocol,
and the remaining octets consist of the VRID (for
example, 00-00-5E-00-01-<
The current state of the virtual router. This is a read-only
field. The valid options are
• initialize (1) -- the virtual router is starting up
• backup (2 -- the virtual router is monitoring the state/
availability of the master router
• master (3) -- the virtual router is functioning as the master
router
Whether VRRP is enabled or disabled for the port
or VLAN.
Priority value to be used by this VRRP router. Set a
value from 1 to 255, where 255 is reserved for the
router that owns the IP addresses associated with
the virtual router. The default is 100.
The master router's real (primary) IP address. This is the
IP address listed as the source in VRRP advertisement
last received by this virtual router. This is read-only field.
Enables or disables the Fast Advertisement
Interval.
When disabled the regular advertisement interval is
used. Default is disable.
The time interval (in seconds) between sending
advertisement messages. Set from 1 to 255
seconds with a default of 1 second. Only the
master router sends advertisements.
Configuring Network Management
>).
vrid
121