156
Chapter 5 Configuring and graphing chassis information
Table 39 Chassis tab fields (continued)
Field
BaseMacAddr
MacAddrCapacity
GlobalFilterEnable
VlanBySrcMacEnable
DiffServEcnCompatibilityEnable
MTUSize
NewEnhancedOperMode
NewEMMode
EnhancedOperMode
MMode
Temperature
314723-D Rev 01
Description
Starting point of the block of MAC addresses used by
the switch for logical and physical interfaces.
Specifies a MAC address capacity.
Used to enable/disable global filters in the system.
Used to enable/disable source MAC based VLANs in
the system.
Used to enable/disable the Explicit Congestion
Notification(ECN) compatibility feature. When set to
enable, the system will mask the ECN bits in the DS
field while marking DSCP and will not match on ECN
capable flows if filter is set on DSmatch. When set to
disable, it will preserve the ECN bits in the DS field
while marking DSCP and will match on full 8-bit DS
field. The default is enable.
Specifies the maximum transmission unit size.
Enables enhanced operation mode.
Enables extended memory mode.
Displays the current EnhancedOperMode status,
enabled (true) or disabled (false).
Displays the current MMode status, enabled (true) or
disabled (false).
The current temperature of the chassis.