Filter Fields - Nortel Viewer User Manual

Queries

Filter fields

The filter fields that are available in the Query Wizard depend on the View
that was used to build the query that is the basis for this new query. Each
field corresponds to call tagging information. Some tagging is standard;
other fields contain customized tagging information. The following table
lists and describes common filter fields.
Field name
Started At
Item Modifed Date
Channel
FormatId
INum
40
Definition
The date and time that the call record was
created.
The date that a change was made to a call
record. Item refers to the database record,
not the actual recording.
TN or recording channel usually used for
trunk side recordings. This field can help
to identify a bad channel.
Shows type of data recorded or audio
CODEC used for recording.
Each recording is allocated a serial
number (6 digits) that corresponds to the
serial number of the recorder. The next 9
digits are the serial number of the call.
This allows you to identify or track the
recorder platform and the individual call
recorder that recorded the call.
Standard 2.0
Frequently
used for
queries
Yes
No
No
No
No
Nortel Viewer