Chapter 5 Configuring and graphing chassis information
Figure 72 Serial Port dialog box
Table 52
describes the Serial Port dialog box fields.
Table 52 Serial Port dialog box fields
Field
IfIndex
Descr
Mode
BaudRate
DataBits
MyAddr
PeerAddr
Description
The slot and port number of the serial port.
The description of the serial port.
Specifies the mode this port should operate in.
Specifies the baud rate of this port.
Specifies the number of data bits, per byte of data, this port
should send/receive.
Specifies this port's IP address. It is used for both "slip" and "ppp"
modes.
Specifies the peer's IP address. It is used for both "slip" and "ppp"
modes.
Configuring Network Management
181