Editing Objects; Editing Management Port - Nortel Passport 8600 Configuring

176 Chapter 5 Configuring and graphing chassis information

Editing objects

The following sections describe each hardware and software object of the
Passport 8000 Series switch.

Editing management port

The management port on the switch fabric/CPU module is a 10/100 Mb/s Ethernet
port that can be used for an out-of-band management connection to the switch.
You can use the Mgmt Port dialog box to specify, among other things,
management information for the device and to set device configuration.
To edit the Passport 8000 Series 8000 Series switch Management port:
1
2
314723-D Rev 01
Select the management port.
Do one of the following:
• Double-click the Management port.
• Right-click the Management port; click Edit.
• From the Device Manager menu bar, choose Edit > MgmtPort.
• From the Device Manager menu bar, choose Edit > Select All >
MgmtPort. Then choose Edit > Mgmt Port.
• On the Device Manager toolbar, click the Edit Selected button.