Viewing The Boot Configuration; Table 41 Boot Config Tab Fields; Figure 61 Chassis Dialog Box-Boot Config Tab - Nortel Passport 8600 Configuring

162 Chapter 5 Configuring and graphing chassis information

Viewing the boot configuration

You can view the boot source, as well as to see the source from which the switch
booted last.
To view the boot configuration:
1
2
Figure 61 Chassis dialog box—Boot Config tab
Table 41

Table 41 Boot Config tab fields

Field
Slot
SwVersion
LastBootConfigSource
LastRuntimeImageSource
LastRuntimeConfigSource
314723-D Rev 01
From the Device Manager menu bar, choose Edit > Chassis.
The chassis dialog box opens with the System tab displayed.
Click on the Boot Config tab.
The Boot Config tab opens
describes the Boot Config tab fields.
(Figure 61).
Description
The slot number of the device.
The software version that is currently running.
The last source from which the switch booted.
The last source from which the run-time image was taken.
The last source from which the run-time configuration was
taken.