Chapter 5 Configuring and graphing chassis information
Table 38 System tab fields
Field
sysDescr
sysUpTime
sysContact
sysName
sysLocation
VirtualIPAddr
VirtualNetMask
ReadWriteLevel:
AuthenticationTraps
EnableWebServer
EnableAccess Policy
LastChange
LastVlanChange
LastStatisticsReset
LastRunTimeConfigSave
LastRunTimeConfigSaveToSlave
LastBootConfigSave
LastBootConfigSaveOnSlave
DefaultRuntimeConfigFileName
Description
The system assigned name and the software version
it is running.
The time since the system was last booted.
The contact information (in this case, an e-mail
address) for the Nortel Networks support group.
The name of this device.
The physical location of this device.
The virtual IP address is the IP address advertised
by the master CPU. Unlike the management port IP
address, this address is stored in the switch
configuration file and not the boot configuration file.
The net mask of the virtual management IP address.
Displays the access level of the trusted host
(readOnly, readWrite, or readWriteAll)
Enables or disables authentication traps. When you
enable, SNMP traps are sent to trap receivers for all
SNMP access authentication.
To view traps, click the Trap Log button on the
Device Manager toolbar.
Enables or disables the Web HTML server. When
enabled, it allows the system to be monitored using a
Web browser.
Enables or disables Access Policy settings.
The time since the last configuration change.
The time since the last VLAN change.
The time since the statistics counters were last reset.
The last run-time configuration that was saved.
The last run-time configuration that was saved to the
standby device.
The last boot configuration that was saved.
The last boot configuration that was saved on the
standby device.
The default Runtime Configuration File directory
name.
Configuring Network Management
153