92
Chapter 4 Configuring and graphing ports
Detecting VLAN Loops
You can detect VLAN loops to tag or untag discarded frames for a port.
To detect VLAN loops:
1
2
3
4
5
6
Figure 26 Loop Detected dialog box
Table 12
Table 12 LoopDetect dialog box fields
Field
PortIndex
314723-D Rev 01
On the device view, select a port or multiple ports.
From the Device Manager menu bar, choose Edit > Port.
The Port dialog box opens with the Interface tab displayed.
Click the VLAN tab.
The VLAN tab opens
Check LoopDetect to enable loop detection.
Click Apply.
Click Loop Detected.
The Loop Detected dialog box displays any loop detection information for the
port
(Figure
26).
describes the LoopDetect dialog box fields.
(Figure 25 on page
90).
Description
Port number.