Checking System Performance; Table 42 Trap Receivers Tab Fields - Nortel Passport 8600 Configuring

164 Chapter 5 Configuring and graphing chassis information
Table 42

Table 42 Trap Receivers tab fields

Field
IpAddress
Community
Version

Checking system performance

You can check system performance with the Performance tab.
To open the Performance tab:
1
2
314723-D Rev 01
describes the Trap Receivers tab fields.
Description
IP address for the trap receiver. (This value may be displayed as a
DNS host name, but it was entered originally as an IP address.)
Community string used for trap messages to this trap receiver.
By default, traps are sent in SNMP V2c format. If you are using an
older NMS that supports only V1 traps (for example, HP OpenView)
you should select that field. Note that UNIX management stations
must run Device Manager as Root to receive traps.
From the Device Manager menu bar, choose Edit > Chassis.
The chassis dialog box opens with the System tab displayed.
Click on the Performance tab.
The Performance tab opens (Figure 63 on page 165).