Editing Cards; Editing Card Information - Nortel Passport 8600 Configuring

Editing cards

Use Device Manager card editing capabilities to view status information for two
types of cards, I/O cards and CPU cards.
To edit the Passport 8000 Series modules (cards):
1
2
The following sections provide a description of the two different card types in the
Edit> Card dialog box and details about each field on the tabs.

Editing card information

You can use the Card tab on the Card dialog box to view status for all I/O cards
except the CPU card.
To open the Card tab:
1
2
Chapter 5 Configuring and graphing chassis information
Select one or more modules.
Do one of the following:
• Double-click the module.
• Right-click the module. On the shortcut menu, choose Edit.
• From the Device Manager menu bar, choose Edit > Card.
• From the Device Manager menu bar, choose Edit > Select All > Cards.
Then choose Edit > Card.
• On the Device Manager toolbar, choose the Edit Selected button.
Select the card.
From the Device Manager menu bar, choose Edit > Card.
The Card dialog box opens with the Card tab displayed
page 168).
(Figure 65 on
Configuring Network Management
167