Enabling The Web Server Using The Cli; Table 7 Web Tab Fields - Nortel Passport 8600 Configuring

72 Chapter 3 Configuring the Web management interface
Table 7

Table 7 Web tab fields

Field
ROUserName
ROPassword
PrimaryHtmlSourceDir
SecondaryHtmlSourceDir
TertiaryHtmlSourceDir
HelpTftpSourceDir
DefaultDisplayRows
LastChange
NumHits
NumAccessChecks
NumAccessBlocks
LastHostAccessBlocked
NumRxErrors
NumTxErrors
NumSetRequest

Enabling the Web server using the CLI

To enable and manage the Web Server using the CLI, use the following command:
config web-server
314723-D Rev 01
describes the Web tab fields.
Description
Specifies the user name for the read-only Web server
account.
Specifies the password for the read-only Web server
account.
Specifies the primary HTML source directory.
Specifies the secondary HTML source directory.
Specifies the tertiary HTML source directory.
Specifies the TFTP source directory for Help files.
Specifies the default display rows for the HTML pages.
Specifies the time of the most recent change to the switch
configuration using the Web interface. This field always
reads none.
Specifies the number of times pages in the Web interface
have been accessed.
Specifies the number of times access attempts have been
authenticated.
Specifies the number of times access has been attempted
and denied.
Specifies the last host accessed blocked.
Specifies the number of receive errors.
Specifies the number of transmit errors.
Specifies the number of set-requests sent to the Web
server.