Replacing Consumable Parts; Replacing The Print Head - SATO CT4-LX Operator's Manual

Hide thumbs Also See for CT4-LX:

Table of Contents

Replacing Consumable Parts

You can easily remove and replace a damaged or worn print head.

Do not connect or disconnect the power cord while your hands are wet. Doing so could

cause an electric shock.

Disconnect the power cord from the AC outlet before you replace the print head.

Wear gloves before replacing the print head, to prevent damage to the print head.

1. Make sure that the product is powered off, and disconnect the power cord from the

2. Press the cover open latch (1) to open the top cover (2).

3. Pull out the parts (3), on which

are engraved.