Integrated Peripherals - Boser HS-6011L Manual

4.5 Integrated Peripherals

The IDE hard drive controllers can support up to two separate hard
drives. These drives have a master/slave relationship which is
determined by the cabling configuration used to attach them to the
controller. Your system supports two IDE controllers--a primary and
a secondary--so you can install up to four separate hard disks.
PIO means Programmed Input /Output. Rather than having the
BIOS issue a series of commands to affect the transfer to or from
the disk drive, PIO allows the BIOS to tell the controller what it wants
and then let the controller and the CPU perform the complete task
by them. This is much simpler and more efficient (also faster).
IDE HDD Block Mode
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Primary Master UDMA
IDE Primary Slave UDMA
IDE Primary Master UDMA
IDE Primary Slave UDMA
On-Chip Primary PCI IDE
On-Chip Secondary PCI IDE
USB Keyboard Support
Init Display First
KBC input clock
Onboard FDC Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART Mode Select
ROM PCI／ISA BIOS <2A69KD2C>
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
: Enabled
: Auto Onboard Parallel Port
: Auto Parallel Port Mode
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: Enabled LCD Panel Type
: Enabled
: Disabled
: PCI Slot
: 8MHz
: Enabled ESC : Quit
: 3F8/IRQ4 F1 : Help
: 2F8/IRQ3 F5 : Old Values
: Normal F6 : Load BIOS Defaults
F7 : Load Setup Defaults
: 378 / IRQ7
: SPP
: Panel 5
: Select Item
PU/PD/+/- : Modify
(Shift) F2 : Color
45